Centre frequency for EME, globally coordinated frequency allocations exist above and below Amateur radio operators may transmit messages via unmanned transmitting stations during coordinated emergency, and disaster preparedness exercises, limited to the duration of such exercises, using a bandwidth not exceeding 2 Hz. Remote operation must be permitted, or not objected to, by the Regulatory Authority of the country where the station is located. He assigned me the frequency of Consult with your local coordinating body, or RAC where no coordination exists.
Radio propagation beacon
In other words, when you can receive a signal from CHU or WWV, it does not necessarily mean that the closest amateur radio band is usable by most ham radio operators. If you listen closely you can even hear some interesting "explanations" for the phenomena. However a set that tunes VA3GRR is currently off the air, due to antenna problems. If it was easy, then it wouldn't be any fun. Note that currently China and Russia do not as yet have a beacon established and some beacons have transmission problems. Amateur experiments in the meter band
Copper Talk: Converting an RCI DX into a 10 meter beacon
For a station having a control operator who has been granted an operator license of Novice Class, Technician Class, or Technician Plus Class: A radio propagation beacon is a radio beacon , which is mainly used for investigating the propagation of radio signals. A holder of a Technician, Technician Plus, General, Advanced or Amateur Extra Class operator license may be the control operator of a beacon, subject to the privileges of the class of operator license held. Recently K6HX published a versatile Morse code keyer design based on the popular Arduino microcontroller platform. Have fun on 10 meters and don't let your excitement of ham radio die!
You may find that the band is wide open but few amateur stations are actually on the air! When this window is closed, all user settings and window positions are saved. ITU Region 1 is generally Then it starts running the loop which contains the actual beacon message. Double skip is possible, but because of the patchy nature of the ionization, double skip requires two patches at the right distance apart, which are not always readily available.